Dryer Not Heating? Reasons And Solutions

by

A dryer that spins but produces no heat is a common household problem. The heating element is responsible for warming the air that dries clothes. A faulty thermostat fails to regulate the temperature, preventing the dryer from heating. A tripped thermal fuse cuts off power to the heating element as a safety measure. All three of them will leave your clothes damp even after a full cycle.

Contents

Is Your Dryer Giving You the Cold Shoulder? A Hilarious (But Helpful) Guide to Dryer Heating Issues

Ah, the dryer. That magical box that transforms sopping-wet clothes into warm, fluffy goodness. But what happens when the magic fades, and your clothes come out feeling like they just spent a week chilling in a meat locker? Frustration, my friend, that’s what happens! But don’t worry, you’re not alone. A cold dryer is a common household headache, and thankfully, often fixable.

The Importance of a Hot Air Affair

Think about it: a properly heated dryer isn’t just about convenience; it’s about efficiency. Without the right heat, your laundry takes forever to dry, hogging energy and skyrocketing your utility bill. Plus, damp clothes left too long can become breeding grounds for mildew and unpleasant odors. Nobody wants that!

Signs Your Dryer’s Feeling Under the Weather

So, how do you know if your dryer is suffering from a heating hiccup? Here are some telltale signs:

  • Clothes are taking an eternity to dry. We’re talking multiple cycles here, people!
  • Your clothes are bone-dry but cold. This indicates that the drum is spinning correctly.
  • There’s absolutely no heat coming from the dryer. Zilch. Nada.
  • The dryer smells like it’s burning or scorching which indicates a problem with the heating mechanism.
  • The dryer stops mid-cycle due to overheating issues.

A Word of Caution (Because Safety First!)

Before we dive into detective mode, let’s get one thing straight: working with appliances involves electricity and, sometimes, gas. If you’re not comfortable with either, don’t be a hero! Call a qualified appliance repair technician. Your safety is paramount. However, if you’re feeling confident and ready to tackle the challenge, proceed with caution and always, always disconnect the power before poking around.

Understanding Your Dryer: Electric vs. Gas – It’s All About the Heat!

So, you’re ready to dive into the nitty-gritty of dryer heating, huh? Awesome! But before we get our hands dirty, we need to understand what kind of beast we’re dealing with. Is it electric, or is it gas? Think of it like this: are we plugging into the wall or hooking up to a fuel source? Knowing the difference is crucial, because the way each type cooks up that sweet, sweet heat is totally different.

Electric Dryers: Zap! You’ve Got Heat!

Electric dryers are all about that electric life! They take that household current and turn it into toasty warmth to fluff up your favorite shirts. The main player here is the Heating Element. This bad boy is basically a super-powered version of the coils in your toaster. Electricity flows through it, the resistance makes it glow red-hot, and voila! You’ve got heat! But how does it know when to chill out?

Enter the Thermistor, the brains of the operation. This little sensor constantly monitors the temperature inside the dryer drum. If it gets too hot (or not hot enough), it sends a signal to the control board to adjust the power to the heating element. Think of it as the thermostat for your clothes, ensuring they get just the right amount of warm fuzzies.

Gas Dryers: Fire It Up! (Safely, Of Course)

Now, let’s talk about gas dryers. These guys use natural gas or propane to generate heat, making them a bit more like a mini furnace for your laundry. Safety is super important here, so don’t go poking around if you’re not comfortable working with gas! One of the key components is the Gas Valve Solenoids. These are like little gatekeepers, controlling the flow of gas to the burner. When the dryer calls for heat, these solenoids open up, allowing gas to flow into the burner assembly.

But wait, how does that gas actually ignite? That’s where the Igniter comes in. This little gadget heats up until it’s glowing red-hot, providing the spark (or rather, the heat) needed to ignite the gas. It’s like the pilot light in your oven, but on-demand. Once the flame is going strong, the Flame Sensor steps in to ensure everything is working safely. This sensor detects the presence of the flame and tells the gas valve solenoids to stay open. If the flame goes out unexpectedly, the flame sensor shuts off the gas supply to prevent a dangerous buildup.

Critical Components for Dryer Heating: A Deep Dive

Alright, let’s roll up our sleeves and dive into the nitty-gritty of what makes your dryer actually dry! We’re talking about the unsung heroes working behind the scenes to transform sopping wet clothes into fluffy, wearable goodness. Whether you’ve got an electric or gas dryer, understanding these key components is the first step to diagnosing—and maybe even fixing—your heating woes.

Heating Element (Electric Dryers)

This is the big kahuna of electric dryers, the heart of the whole operation. Think of it like the heating coil in your toaster, but on a larger scale. Electricity zips through this coil, causing it to heat up like crazy—enough to turn that damp denim into your favorite, perfectly worn-in jeans.

Testing Time: Grab your trusty multimeter, set it to the continuity setting, and check if the element is still playing ball. No continuity? Looks like it’s time for a replacement.

Replacement Rumble: Remember to kill the power at the breaker before you even think about touching this thing. Then, with a little bit of disassembly (refer to your dryer’s manual, of course!), you can swap out the old element for a shiny new one. Just make sure it’s the right voltage and wattage!

Thermal Fuse

This little guy is your dryer’s last line of defense against overheating. If things get too toasty (usually due to restricted airflow), the thermal fuse blows, cutting off power to the heating element. It’s like a tiny, heroic sacrifice to prevent a potential fire.

Common Culprits: The usual suspect? Lint buildup! Make sure your vents are clear to avoid sending this fuse to an early grave.

Replacement Rhapsody: This is a relatively easy fix. Disconnect the power, locate the fuse (usually on the blower housing), and pop in a new one. But remember, if it keeps blowing, you’ve got a bigger problem to tackle!

Thermostat (High-Limit Thermostat)

Think of this as the heating element’s boss. It keeps tabs on the temperature and cycles the heating element on and off to maintain a consistent heat. Without it, your clothes would either come out damp or practically singed.

Failure Fallout: A bad thermostat can lead to a dryer that either doesn’t heat at all or overheats like a pizza oven.

Multimeter Magic: Set your multimeter to continuity and check if the thermostat is opening and closing as it should. If it’s stuck open or closed, you know what to do.

Thermistor

This fancy sensor acts like a highly sensitive thermometer, constantly monitoring the air temperature inside the dryer. It sends this info back to the control board, allowing it to fine-tune the heating process.

Resistance is Key: The thermistor’s resistance changes with temperature, which is how it communicates with the control board. Testing involves measuring this resistance at different temperatures.

Testing Tidbits: Use a multimeter to measure the resistance. You’ll need to consult your dryer’s service manual to know what the correct resistance values should be at different temperatures.

Control Board (or Timer)

The brains of the operation! The control board (or timer, in older models) orchestrates the entire drying process, including the heating cycle.

Problem Potential: A glitchy control board can cause all sorts of havoc, from the dryer not heating at all to running constantly.

Note: Testing a control board often requires specialized knowledge and equipment. If you suspect a faulty control board, it might be best to consult a pro.

Gas Valve Solenoids (Gas Dryers)

Exclusive to gas dryers, these little guys control the flow of gas to the burner. When the control board calls for heat, these solenoids open up, allowing gas to flow and ignite.

Testing the Troops: Use a multimeter to check the solenoids for continuity. If they’re not opening or closing properly, it’s time for a replacement.

Igniter (Gas Dryers)

The igniter is like the spark plug for your gas dryer. It heats up until it’s white-hot, igniting the gas and creating that beautiful blue flame.

Failing Flame: Common signs of a failing igniter include a dryer that takes a long time to start or one that doesn’t ignite at all.

Flame Sensor (Gas Dryers)

This safety-conscious component makes sure the flame is actually lit and stays lit. If the flame goes out, the flame sensor shuts off the gas to prevent a dangerous buildup.

Safety Shutdown: A faulty flame sensor can cause the dryer to shut off prematurely, leaving your clothes damp and you frustrated.

Wiring

Don’t underestimate the importance of good old-fashioned wiring. Damaged or loose connections can wreak havoc on any appliance, and your dryer is no exception.

Inspection Insights: Give your dryer’s wiring a thorough once-over, looking for any signs of wear, burning, or loose connections. A loose wire can prevent a component from receiving power, while damaged insulation can create a short circuit.

Dryer Belt

Okay, I know what you’re thinking. “The belt? What does that have to do with heat?” Well, indirectly, it can play a role. If the belt breaks, the motor has to work harder, which can cause overheating. Plus, a broken belt means the drum isn’t turning, which leads to the heating element baking the clothes at the bottom of the dryer.

Belt Breakdown: Make sure your belt is in good shape. If it’s worn, cracked, or broken, replace it pronto to prevent bigger problems down the line.

Diagnosing the Problem: Why Is My Dryer Giving Me the Cold Shoulder?

Okay, so your dryer’s acting up. Instead of that toasty warmth, it’s blowing out air colder than your ex’s heart. Don’t worry, you’re not alone! Let’s play detective and figure out why your dryer’s gone rogue. We’ll break down the usual suspects, from simple glitches to full-blown component meltdowns.

Faulty Components: The Usual Suspects

Think of your dryer as a team. If one player is out, the whole game suffers. A burnt-out heating element in an electric dryer is like the quarterback calling in sick – no heat gets produced. Similarly, a tripped thermal fuse is like the safety net breaking; it cuts off the power to prevent a fire but leaves you with damp clothes. Other culprits include a bad thermostat, a faulty thermistor, or even a control board that’s lost its mind. We’ll dive deeper into testing these in later sections, but for now, just know these guys can be the source of your woes.

Overheating: Too Hot to Handle

Ironically, sometimes a dryer that can’t heat up is actually suffering from overheating. Weird, right? This usually happens when something prevents the heat from escaping, causing a safety mechanism (like that thermal fuse we mentioned) to shut things down. Common causes include:

  • Restricted Airflow: Think clogged vents and lint traps (more on that below).
  • Faulty Thermostat: If the thermostat is wonky, it might not regulate temperature properly.

To prevent this, keep those vents clean and make sure your dryer has room to breathe!

Restricted Airflow: Lint, the Silent Killer

Ah, lint. The fluffy byproduct of clean clothes, and the arch-nemesis of efficient drying. When lint builds up in the lint trap or, worse, in the ventilation ducts, it’s like putting a pillow over your dryer’s face. It can’t breathe! This restricts airflow, causing the dryer to work harder, take longer to dry, and potentially overheat.

The connection to _lint buildup_ is no joke – it’s a serious fire hazard! So, cleaning out that lint trap after every single load isn’t just good practice, it’s fire safety 101. And don’t forget to clean the vent regularly!

Electrical Issues: Power Trip

Sometimes, the problem isn’t the dryer itself, but the power it’s getting. A tripped circuit breaker is an obvious sign, but a faulty outlet can also cause issues. If the dryer isn’t getting enough power, the heating element won’t get hot enough, or it might not heat at all. Make sure the dryer is plugged into a dedicated circuit and that the outlet is functioning correctly.

Gas Supply Problems (Gas Dryers): No Fuel, No Flame

For those of you with gas dryers, the issue might be with the gas supply. Check these things first:

  • Is the gas turned on? Obvious, but easy to overlook.
  • Is there enough gas pressure? This might require a professional to check.
  • Are there any kinks or blockages in the gas line?

A gas dryer needs a steady supply of fuel to create that cozy heat.

Ventilation Issues: Venting Frustration

Last but not least, let’s talk about ventilation. Your dryer vent is like its respiratory system, carrying away hot, moist air and lint. If the vent is too long, has too many bends, or is made of the wrong material (we’re looking at you, plastic foil vents!), it can restrict airflow and lead to all sorts of heating problems. Make sure your vent is properly installed, made of rigid metal, and as short and straight as possible. Regular cleaning is crucial, too!

Troubleshooting Steps: A Systematic Approach to Dryer Repair

Okay, so your dryer’s decided to take an extended vacation from its heating duties? Don’t panic! We’re going to walk through this together, step-by-step. Think of it like a detective novel, except instead of solving a crime, we’re bringing the heat back to your laundry routine.

First things first, let’s not jump to conclusions or start dismantling things right away. Start with the simplest solutions. It’s like checking if the door is unlocked before you try to pick the lock, you know? Have you checked that the lint trap is clean? Seriously, sometimes it’s the little things! And is the dryer actually getting power? Make sure it’s plugged in and the breaker hasn’t tripped. You’d be surprised how often that’s the culprit.

If those easy fixes don’t do the trick, then it’s time to dig deeper. We’re going to follow a step-by-step approach to isolate the problem. Think of it as a process of elimination. We’ll start with the most likely suspects and work our way down until we find the guilty party…or guilty part, in this case.

Essential Tools for the Job

Alright, before we go any further, let’s gather our gear. You wouldn’t go on an adventure without a map and a compass, right? Well, these are the tools you’ll need for your dryer repair adventure.

  • Multimeter: This is your best friend. It’s like a doctor’s stethoscope for appliances. We’ll use it to test components like the heating element and thermostat to see if they’re still kicking.
  • Lint Brush/Vacuum: Seriously, you need this. A clean dryer is a happy dryer (and a safe dryer, let’s be real). It’s crucial for cleaning and maintenance!
  • Appliance Tester: Safety first! This is optional, but highly recommended. It lets you test for electrical shorts without touching anything directly. Think of it as a force field against accidental zaps.
  • Screwdrivers, Wrenches/Sockets, Pliers: The trusty trio (plus one) of any DIY adventure. You’ll need these for opening things up, tightening things down, and generally wrangling your dryer into submission.

Testing and Diagnosis: Pinpointing the Faulty Part

Alright, so your dryer’s acting up and you suspect a faulty component? Don’t worry; we’re about to become appliance detectives! The secret weapon? A multimeter! It’s like the stethoscope for your dryer, helping us listen for the telltale signs of trouble. But safety first! Always disconnect the power before you start poking around with tools. We don’t want any unexpected zaps!

Testing Procedures

Grab your multimeter – it’s time for some electrical sleuthing! Here’s the rundown on testing the most likely suspects:

  • Heating Element (Electric Dryers):
    • Set your multimeter to the continuity setting (it usually looks like a little sound wave or a diode symbol).
    • Disconnect the wires from the heating element terminals.
    • Place one probe of the multimeter on each terminal of the heating element.
    • If you get a reading (not infinite resistance or “OL” on the display), the heating element has continuity, which likely means it’s still good. If you get no reading, your heating element is likely kaput and needs replacing.
    • Also, check for a grounded heating element. With the multimeter still set to continuity, place one probe on a terminal and the other on the metal casing of the heating element. You shouldn’t get continuity. If you do, the element is shorted and needs replacement.
  • Thermal Fuse:
    • Again, set your multimeter to continuity.
    • Disconnect the thermal fuse from the wiring.
    • Place a probe on each end of the fuse.
    • A good thermal fuse will show continuity (a reading close to zero ohms). If you get no reading, the fuse is blown, and it’s time for a replacement. Note: Thermal fuses usually blow because of airflow restriction – make sure to address that before replacing it.
  • Thermostat (High-Limit Thermostat):
    • With the multimeter on continuity and the thermostat disconnected, place a probe on each terminal.
    • A functional thermostat should show continuity at room temperature.
    • If you get no continuity, the thermostat is likely faulty.
  • Gas Valve Solenoids (Gas Dryers):
    • Set your multimeter to measure resistance (ohms).
    • Disconnect the wires to each solenoid.
    • Place a probe on each terminal of the solenoid.
    • You should get a resistance reading within the manufacturer’s specifications (usually listed on the solenoid itself or in the dryer’s service manual). A reading of zero or infinite resistance indicates a faulty solenoid.

Important Notes:

  • Always refer to your dryer’s service manual for specific testing procedures and component locations.
  • If you’re not comfortable working with electrical components or gas, it’s always best to call a qualified technician.

Diagnosis: Putting the Pieces Together

Okay, you’ve got your test results. Now, let’s play detective!

Think of it like a process of elimination. Let’s say your electric dryer has no heat:

  1. Check the Thermal Fuse: If it’s blown, replace it, but find out why it blew!
  2. Test the Heating Element: No continuity? Time for a new heating element.
  3. Thermostat Test: If the thermostat is faulty, replace it, but find out why it failed!

For gas dryers, if you’re not getting any heat:

  1. Check Gas Valve Solenoids: If they’re not working, the gas isn’t flowing.
  2. Inspect the Igniter: If it doesn’t glow, it can’t ignite the gas.
  3. Flame Sensor Check: A bad flame sensor will shut off the gas, even if there’s a flame.

The Decision Tree: (High-Level Example)

  1. Dryer Not Heating?
    • Electric Dryer:
      • Is the thermal fuse blown? Yes -> Replace, Check for airflow issues. No -> Test the heating element.
      • Heating element continuity? Yes -> Test the thermostat. No -> Replace the heating element.
      • Thermostat working? Yes -> Suspect control board or wiring. No -> Replace the thermostat.
    • Gas Dryer:
      • Is the igniter glowing? Yes -> Test the flame sensor. No -> Replace the igniter.
      • Flame sensor working? Yes -> Test gas valve solenoids. No -> Replace the flame sensor.
      • Gas valve solenoids working? Yes -> Suspect gas supply issues. No -> Replace gas valve solenoids.

By methodically testing and eliminating potential causes, you’ll be able to zero in on the culprit and get your dryer back to its warm, fluffy self. Remember to consult your dryer’s specific repair manual to aid your journey. Happy troubleshooting!

DIY Repair Guide: Replacing Common Faulty Components

Alright, you’ve bravely diagnosed the issue, and now it’s time to roll up your sleeves and get your hands dirty! We’re talking about replacing those pesky faulty dryer components. Don’t worry, it’s not brain surgery, but it does require a bit of focus and the willingness to follow instructions carefully. Let’s dive into some common repairs!

Repair Procedures

So, you found a bad part now what?

  • Heating Element Replacement (Electric Dryers):
    • First things first: Safety! Disconnect the power. Seriously, don’t skip this step.
    • Access the heating element (usually at the back of the dryer). Consult your dryer’s manual for specific instructions, or YouTube if that fails.
    • Remove the back panel. You might need a screwdriver, socket, or both.
    • Disconnect the wires from the old element. Take a picture! You’ll thank yourself later when you’re reconnecting them.
    • Remove the old heating element assembly. It’s usually held in place with screws or clips.
    • Install the new heating element assembly.
    • Reconnect the wires according to the photo you took!
    • Reassemble the dryer. Put the back panel back on and screw it in.
    • Plug it in and test it. Cross your fingers!
  • Thermal Fuse Replacement:
    • Again, disconnect the power! This is not optional.
    • Locate the thermal fuse. It’s typically on the blower housing or near the heating element.
    • Remove the screws or clips holding the fuse in place.
    • Disconnect the wires from the old fuse. These are often just push-on connectors.
    • Install the new thermal fuse.
    • Reconnect the wires.
    • Reassemble the dryer.
    • Test the dryer to make sure it’s heating properly. Woohoo!
  • Thermostat Replacement:
    • Safety first! You know the drill: Unplug the dryer!
    • Locate the thermostat. It’s usually near the heating element or on the blower housing.
    • Remove the screws or clips holding the thermostat in place.
    • Disconnect the wires from the old thermostat.
    • Install the new thermostat.
    • Reconnect the wires.
    • Reassemble the dryer.
    • Test the dryer to ensure it’s regulating temperature correctly. No more scorched clothes, hopefully!
  • Igniter Replacement (Gas Dryers):
    • Shut off the gas supply! Locate the gas shutoff valve near the dryer.
    • Disconnect the power! Just making sure you didn’t forget.
    • Access the igniter. This usually involves removing the front panel or a rear access panel.
    • Disconnect the wires from the old igniter.
    • Remove the old igniter (usually held in place with screws).
    • Install the new igniter.
    • Reconnect the wires.
    • Reassemble the dryer.
    • Turn on the gas supply.
    • Test the dryer. Listen for that satisfying whoosh of the burner firing up!

Cleaning Is Key

Before you button everything up, take a moment to clean out any lint, dust, or debris you find inside the dryer. This can help prevent future problems and keep your dryer running efficiently. Remember, lint buildup is a fire hazard, so don’t skimp on this step! A lint brush and vacuum are your best friends here.

Vent Cleaning: The Secret Weapon

Finally, don’t forget about the dryer vent! A clogged vent is a major cause of dryer inefficiency and overheating.

  • Disconnect the vent from the back of the dryer.
  • Use a vent cleaning brush or vacuum to remove lint from the vent.
  • Check the outside vent opening to make sure it’s clear of obstructions.
  • Reattach the vent to the dryer. Make sure it’s secure!

You’ve got this. Tackle each repair one step at a time, and your dryer will be back in action in no time!

Safety First: Don’t Be a Shocking Statistic!

Alright, before we even think about poking around inside that dryer, let’s have a little heart-to-heart about safety. Trust me; a slightly damp shirt is way better than a trip to the emergency room. We’re talking about electricity and, for some of you, gas—so let’s treat this seriously, okay? Think of this section as your dryer repair safety bible. We’re gonna make sure you’re prepped and ready to dive in safely.

Unplug, Unplug, UNPLUG! (Seriously!)

I cannot stress this enough: the very first thing you absolutely must do is disconnect the power. Yes, even if you’re just changing a light bulb in there. Find that plug and yank it outta the wall like you’re pulling the winning lottery ticket. Consider it a sacred ritual! This is crucial to avoid getting a nasty shock that could turn your repair project into a seriously bad day. No power = no zaps. It’s that simple.

Gas Dryers: A Whole Different Ballgame!

Now, for those of you with gas dryers, listen up very carefully. Gas is no joke. Before you even think about touching anything, you need to shut off the gas supply. Usually, there’s a valve near the dryer. Turn it off! Then, just to be doubly sure (because we really don’t want any explosions), grab a spray bottle filled with soapy water. Spray it on the gas connections. If you see bubbles, that means you’ve got a leak. Do not proceed with the repair! Call a qualified gas technician immediately. Bubbles equal big trouble. It is also important to note that natural gas is highly flammable and explosive.

Let It Breathe: Ventilation is Key

It is also important to remember the importance of proper ventilation when doing any work on your dryer! You are also reducing any chances of the gases building up if you have a dryer running on gas. This also means that you should not block any vents or openings on the dryer during the repair process.

Electricity Is Not Your Friend: Handle with Care

When dealing with electrical components, treat them with the respect they deserve. Assume everything is live until you’ve tested it. Use tools with insulated handles, and don’t work in damp conditions. Water and electricity are a match made in… well, a very unpleasant place. If you’re not sure about something, err on the side of caution and call a professional.

Tool Time (Safely!)

Using the right tool for the job is not just about efficiency; it’s about safety. Make sure your tools are in good condition. No frayed wires, no broken handles, and definitely no trying to MacGyver something with a butter knife. And those insulated handles? Make sure they’re actually insulated. A good set of tools is an investment in your safety and the success of your dryer repair mission.

9. Preventative Maintenance: Keeping Your Dryer Running Smoothly

  • Preventative Maintenance:

    Okay, so you’ve wrestled with your dryer, possibly emerged victorious, and are now enjoying warm, fluffy towels again. But let’s be honest, nobody wants a repeat performance of troubleshooting and repairs. That’s where preventative maintenance swoops in to save the day! Think of it as a regular spa day for your dryer, keeping it happy and healthy.

    Why is this spa day a must? Simple: regular cleaning and inspections can catch small issues before they turn into big, expensive problems. It’s like going to the dentist; a quick checkup can prevent a root canal later. Dryers can be sneaky, gradually losing efficiency until one day, they just throw in the towel (pun intended!).

  • Tips for extending the life of your dryer and preventing heating issues:

    Alright, let’s dive into the nitty-gritty of keeping your dryer in tip-top shape. These are some simple yet effective habits you can adopt.

    • Clean the lint trap after every load: This is the golden rule of dryer maintenance. Seriously, every load. Consider it a post-laundry ritual. A clogged lint trap isn’t just bad for heating; it’s also a fire hazard. Empty it out and give it a quick scrub with a brush now and then. It’s also an incredibly simple task.

    • Inspect and clean the dryer vent regularly: This is where things get serious. The vent is the duct that carries hot, moist air from your dryer to the outside. Over time, lint can accumulate here, creating a major blockage. At least twice a year, disconnect the vent from the dryer and the wall, and give it a thorough cleaning. You can use a special dryer vent cleaning brush or even a vacuum cleaner with an extension hose. Trust me; your dryer will thank you.

    • Check the dryer vent for clogs: Even if you clean the vent regularly, it’s still a good idea to check for clogs periodically. Look for signs of reduced airflow when the dryer is running. If you suspect a blockage, investigate further. Sometimes, birds or other critters can build nests in the vent, causing serious problems.

    • Avoid overloading the dryer: We’ve all been there, trying to cram as much laundry as possible into a single load to save time. But overloading the dryer can put unnecessary strain on the motor and heating element. It can also prevent clothes from drying properly, leading to longer drying times and increased energy consumption. Stick to the manufacturer’s recommended load size for best results.

So, there you have it! Troubleshooting a dryer that spins but doesn’t heat might seem daunting, but with a little patience and these tips, you’ll hopefully be back to warm, fluffy towels in no time. If you’re still stumped, don’t hesitate to call in a professional – sometimes it’s just easier (and safer!) to let the experts handle it. Happy drying!

Related Posts:

Leave a Comment